Home > Vonage Vdv21 Vd > Vonage Error Message 002

Vonage Error Message 002

Contents

If you have five or less phones you might have a faulty phone. You may need to look for an anti-002 patch to get things working with Ocarina / Gecko OS cheats... Then plug the power cord back into the V-Portal. Trending A telemarketer keeps calling my house at 6:30 in the morning and will not stop. weblink

Wait for the Phone Port 1 LED to light solid blue or slowly blink (if Voicemail is waiting) before using the Vonage Box for calling. Allow up to 2 weeks for shipping. When was barton mill canterbury built? Complete instructions are provided in “How do I setup a PPPoE connection?” Phone Port 1 LED Behavior lit solid blue You can place and receive phone calls using phone line 1. https://support.vonage.com/app/answers/detail/a_id/862/~/v-portal%C2%AE-(vdv21)-telephone-adapter

Vonage Vdv21-vd Manual

Message[011] WARNING! Note : If the problem still exists there could be a short in your home wiring that must be fixed before you install your V-Portal. After about 30 seconds, plug it back in again.

To resolve the issue: 1.Make sure all your phones are hung up securely (on hook). 2.Wait 3 – 4 minutes while the V-Portal detects the phone and tests the phone port. The V-Portal automatically searches for the MAC address of the other device and adopts it so that the V-Portal can connect to your ISP on behalf of all the devices connected On the Time Capsule, the WAN port is furthest to left if you're looking straight at the ports, and has a small circle above it. Vonage Powering Up Loop For Phones: Make sure the handset for each of your phones is sitting snugly in the phone cradle (on-hook).

Indicates that there is a short in your phone or fax machine, phone cord, or home phone wiring (if Phone Port 1 of the V-Portal is connected directly to a phone Vonage Message 004 Time Warner Cable SoCal">
Vonage vs. but also know the basics around tyhe system. http://screenshots.portforward.com/routers/Vonage/VDV21-VD/Tips_and_Troubleshooting.htm If theres a dial tone you might need to power cycle your computer or reconfigure the network connections on your computer.

This setup is still not working. Vdv21-vd Hack Verify that your Internet connection to your ISP is working. The Internet knows where to direct calls placed to your phone number once an IP address is assigned. If youve activated both Vonage phone lines on your V-Portal, simply use a standard two-wire phone cord with each single-line phone, one for Phone Port 1 and one for Phone Port

Vonage Message 004

Internet Connect Error [Code 002] Check if your Internet is down. http://www.techyv.com/questions/message-002-line-1-not-able-connect-internet Disconnect cables from phone ports 1 and 2 immediately. Vonage Vdv21-vd Manual If the problem still exists when the Vonage Box has finished powering up, check with your ISP to see if they're blocking VoIP calls. Vonage Vdv21-vd Setup Unplug the existing Ethernet cable that connects your modem to your computer or router and plug into the yellow Ethernet port on the V-Portal phone adapter.

This indicates that the device is on and booting up. have a peek at these guys Typically indicates that you tried to place a call from a phone connected to Phone Port 2 and you've only activated one phone line of the V-Portal. Category:Networking Share this conversation Expert: Engineer Lee replied7 years ago. Complete instructions are provided in How do I setup a PPPoE connection?” Your V-Portal can not reach your ISP. Vonage Adapter Keeps Powering Up

Message[008] Incorrect network settings. This will run the phone ports diagnostic test on the V-Portal to determine if the error has been corrected. Offer good while supplies last and only on new account activations. check over here To resolve the issue: 1.Make sure all your phones are hung up securely (on hook). 2.Wait 3 – 4 minutes while the V-Portal detects the phones and tests the phone ports.

Indicates that there is a short in your phone or fax machine, phone cord, or home phone wiring (if Phone Port 1 of the V-Portal is connected directly to a phone Vonage Vdv23 Manual Vonage Register Error [Code 005] Unplug power connector and plug it in again. Vonage customer care agents are trained to assist customers with this rare problem.

You use cable service and the V-Portal can not get an IP Address from your Internet Service Provider (ISP).

Verify that your router is in front of the Vonage device and is not blocking any incoming traffic. Note: You will not be able to make or receive calls on Phone Port 1 or Phone Port 2 during the short time the test is running. 3.Start using Vonage service You have DSL service, use PPPoE but entered an invalid PPPoE User Name and/or Password when setting up PPPoE via the Vonage Box Web UI. Vonage Router Ip Address OK, let's try this first.Make sure the cable from Modem (wall) is running to the WAN port of the Time Capsule.

Does the Ethernet Port (LAN) icon display on the V-Portal LCD? For example, no computer or router is plugged into the yellow port. You can use a 3-pronged grounded extension cord with your V-Portal. http://gmailpush.com/vonage-vdv21-vd/vonage-error-message-204.html Message [002] -- Cannot connect to Internet.

If your ISP required you to register the MAC address of a PC or router on your LAN when you set up your cable service, your V-Portal can adopt that device’s You will get a message stating that your access is blocked by Parental Controls, followed by a login page. Try restarting modem. Restart the Time Capsule Change the Internet setting of Time Capsule to "Share public IP address"Once you have internet access all set-up without the Vonage even plugged in, re-connect Vonage by

RATES EXCLUDE INTERNET SERVICE, FEES AND TAXES. DSL users, check ISP username and password. Unplug the blue cable and securely plug it back into the blue port. You use cable service and the Vonage Box cannot get an IP Address from your Internet Service Provider (ISP).

The V-Portal is plugged into an ungrounded wall power outlet or an ungrounded extension cord. Unplug your phone from the V-Portal and plug it back in to the other green Phone port. Like any phone line, if too many phones are connected to a single Vonage line, the signal may fade and not all the phones will ring when a call comes in. Short in Line 2 Error [Code 016] Faulty phone or home wiring.

The number transfer process takes approximately 10 business days from the time you confirm your transfer request. About Sharath Reddy Questions 1 Answers 8139 Best Answers 1989 Vote Up 0 Vote Down Best Answer: No Question Category: Internet Login/Register to Answer Login Username Password Remember Me Register EDITOR Before you continue, be sure to allow enough time for your modem to complete its start-up process. What can I do if Ive reset my equipment but still dont have a dial tone?

This will run the phone ports diagnostic test on the V-Portal to determine if the error has been corrected. Loading... Disconnect the phone cord from Phone Port 2 and contact Vonage. Your ISP (cable company) requires you to register the MAC Address of your Vonage Box with them but you previously registered the MAC Address of a different networking device (router or

Refer to the V-Portal Online User Guide or the Vonage Box Online User Guide for more detailed information. Note : You will not be able to make or receive calls on Phone Port 1 or Phone Port 2 during this time. 2.If the V-Portal still displays this error after